Datex-Ohmeda S/5 FM, User Manual

Page: 40 / 94

38
38
Viewing numerical trends
1. Press the
Pt.Data & Trends
key.
2. Select Trends - Numerical
.
•
To see more pages, select Scroll Pages and scroll with the
ComWheel.
•
To see more data, select Cursor and scroll with the ComWheel.
Numerical trends contain four pages with the maximum of 72 hours of
trend data. Real-time ECG waveform is displayed at the top of each
page.
Creating snapshots manually
A snapshot is a frozen frame of preconfigured waveforms or trends
saved in the monitor memory. For configuration, see section "Setting
up the monitor before use."
To create a snapshot:
•
Press the
Take Snapshot
key.
The monitor saves an image of preconfigured waveforms or trends.
You can take up to 400 snapshots, depending on the data load.
When a snapshot is taken by pressing the
Take Snapshot
key, it is
automatically numbered. This number also appears in the column
'Mark' in the numerical trends.
Automatic snapshots
Automatic snapshot creation can be defined separately for each
arrhythmia alarm. For more details, see section "ECG/ST" and
section "Setting up the monitor before use."
Snapshots are always taken automatically on Brady, Tachy and Art
sys/dia/mean high/low alarms when they reach the red level if
automatic snapshot creation is enabled (see section "Setting up the
monitor before use"). Invasive pressure alarms reach the red level
only when there is a simultaneous yellow HR alarm.
Viewing and printing snapshots
To view snapshots:
1. Press the
Pt.Data & Trends
key.
2. Select Trends .
3. Select Snapshot - Next Snapshot .
Turn the ComWheel to move to the next snapshot. In the upper right-
hand corner, you can see the time the snapshot was created. Five
fields can be displayed on the snapshot page, and six fields can be
printed.
To print snapshots:
1. Press the
Pt.Data & Trends
key.
2. Select Trends - Snapshot .
3. Select Print Page .
Erasing trends and snapshots
1. Press the
Admit/Discharge
key.
2. Select Discharge .
If the monitor has been turned off from the ON/standby key but the
patient has not been discharged, the trend and snapshot data will be
stored in the memory for 15 minutes.