Datex-Ohmeda S/5 FM, User Manual

Page: 23 / 94

21
21
Setting up the monitor before use
Before starting to use the monitor, check the monitor installation
settings and what is configured in different user modes, and make the
necessary changes. The user modes can be hospital-specific. For
more information about the default user modes, see the “Default
Configuration Worksheet.” For more information about the installation
settings and user modes, see the “User’s Reference Manual.”
Passwords
The default password for entering the Install/Service menu is
16 4 34
.
The default password for entering the
Save Modes menu is
13 20 31
.
Interfacing
1. Press
Monitor Setup
and select
Interfacing
.
2. Select the desired interfaced external devices.
Battery setup
Through this menu, you can check the battery status:
1. Press the
Monitor Setup
key.
2. Select Battery Setup . Battery information is now available.
Setting time and date
NOTE: If the monitor is connected to the S/5 iCentral, it follows the
iCentral’s time settings and the
Time and Date menu is not available.
NOTE: You cannot change the monitor’s time settings after the patient
has been admitted.
1. Press
Monitor Setup
and select
Time and Date
.
2. Turn and push the ComWheel to set the time and date.