Datavideo SE-2800 Instruction Manual Download

Page: 27 / 45

Dynamic Logo tab

The SE-2800 can store one dynamic moving logo in its
memory.  The  dynamic  logo  can  be  a  targa  (TGA)
sequence,  GIF  or  AVI.  It  must  be  no  longer  than  75
frames/images long.

Using  the  Dynamic  logo  tab  you  can  use  the

LOAD

button to browse for a logo sequence of images stored
on the computer. This logo sequence is then loaded
into the application window.

The

WRITE

button can then be used to save the new

logo sequence into the dynamic logo store on the
switcher.

Multi screen A tab

Multi screen B+D tab

Multi screen C+E tab

These three tabs are used to write new Multi screen layouts to the switcher in order to change the HDMI multi-view
layouts as described on

page 11

NOTE:

Only change these layouts with guidance from your local Datavideo office as attempting to edit or load your

own layouts may result in a poor outcome or a non-responsive switcher.

Summary of Contents for SE-2800














































Search results

Summary of Contents for SE-2800

Reviews:

Related manuals for SE-2800

Brands by name

Popular brands

Datavideo SE-2800, Instruction Manual

Search results

Summary of Contents for SE-2800

Reviews:

Related manuals for SE-2800

Brands by name

Popular brands