24
Switcher configuration using a computer
– SEConfig software
It is possible to configure the SE-2800 with a Windows 7 computer using an Ethernet connection.
1.
Switch off or shut down the SE-2800 and Computer in the normal way.
2.
Connect the Ethernet cable between the SE-2800 rear panel and the Windows 7 Computer.
3.
Turn on the Windows 7 Computer.
4.
Install the supplied SEConfig software on to a Windows 7 Computer
.
5.
Double click the
SEConfig
DV icon to launch the application.
6.
If you immediately get an error window, do not worry, click
OK
.
7.
Now Press
PC Control button
so it is
ON
in the
MENU area
of the SE-2800 keyboard.
8.
Select
Ethernet
to display the Computer’s IP Address. Click the
Find button
to find and display the
SE-
2800 Switcher’s IP Address in the drop down list. The first three numbers in both IP addresses
should match. See below example.
9.
Click
Connect
and additional function tabs will become available at the top of the application window.
These are; switcher, settings, input settings, multi screen window signs (source labels), still pictures,
logos, dynamic logo, multi screen A, multi screen B+D and multi screen C+E
