38
How to Re-calibrate the SE-2800 T-Bar
After a firmware update of the switcher it will be necessary to re-calibrate the T-Bar to get it working correctly.
1.
Move the
T-Bar
to its
lowest position
.
2.
Power OFF
the SE-2800 switcher.
3.
Press and
hold down button 1 on both the Program and Preset
rows of the switcher
’s keyboard.
4.
Power ON
the SE-2800 switcher while
still holding down the
buttons
in step 3.
5.
The switcher will start but the keyboard lights will remain dead except
for the T-Bar progress LEDs. When these
LEDs flash ON and OFF
release the buttons from step 3.
6.
Move the
T-Bar
to its
highest position
and then press the
CUT
button
.
7.
Move the
T-Bar
back to its
lowest position
and then press the
AUTO TAKE button
.
8.
To exit the calibration procedure press the
CLOCK button
.
9.
Ensure the
TIMER button
is
OFF
.
10.
Test the T-Bar.
If necessary change the
T-Bar Mode
in the
MENU options
.
