10
AUDIO OUT
Supports two channels XLR Balanced Audio output.
See
page 29
for more details.
AUDIO IN
Supports four channels XLR Balanced Audio Input.
See
page 29
for more details.
TALLY OUT
The SE-2800 Tally Output port provides bi-colour tally information
to a number of other Datavideo products, such as the ITC-100
eight channel talkback system or the Datavideo TLM range of
monitors.
See
page 33
for more details.
GPI
The GPI socket can be used for simple external control. See
page
32
for more details.
RS-232 REMOTE
This feature is not currently active. A firmware update may be
released at a later date. Please check with your local Datavideo
office for advice on this connection and the latest firmware.
DC IN
Connect the supplied 12V 5A PSU to this 4pin XLR socket.
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Grounding Terminal
When connecting this unit to any other component, make sure
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
to use wire with a cross-sectional area of at least 1.0 mm.
Main Unit
– Front Panel
The front panel on the SE-2800 main unit has a grille for two airflow cooling fans. Please do not block or cover this
grille as the unit may overheat. This grille should also be kept free of dust. The front panel can be removed by
using the four thumbscrews. A soft brush or cloth can then be used to clean the grille before attaching it back to the
unit.
The power button starts and shuts down both the SE-2800 main unit and its attached keyboard.
