Datavideo KMU-100, Instruction Manual

Page: 28 / 88

28
Motion Mode – You can select the motion mode in the Frame Setting Area . The available
options are:
Single – Single movement from Start to Stop.
Loop – Cyclical movement, i.e. Start-Stop, Start-Stop
and so on.
Ping-Pong – Swing cyclical movement, i.e. Start-Stop,
Stop-Start, Start-Stop and so on (pendulum swing
motion).
Trig. Loop
–
This can trigger cyclical movement. i.e.
Start-Stop, Start-Stop and so on.
Trig. Ping-Pong
–
This can trigger Swing cyclical movement, i.e. Start-Stop, Stop-Start, Start-
Stop and so on (pendulum swing motion).
Trig. Double Ping-Pong
–
This can trigger dual Swing cyclical movement, i.e. Start-Stop,
Stop-Start, Start-Stop and so on.
Note
：
You will see the animation as virtual movement of the camera shot.
In addition to changing the window position, you can define its size as well, thereby
effectively realizing a
virtual zoom function . As shown in the diagram below, the Stop
window is much smaller size than the Start window .
After selection of the motion mode, you are then allowed to select one of the three speed
modes (
slow , medium , or fast ) as shown in the diagram below.