17
For the selected
KMU-100
device, you can load the presets with user settings from one of
four Preset slots
. You can double click the
KMU-100
device icon in the
control area
(the
rightmost KMU-100 column) to open the
KMU-100 Control Interface
as shown in the
diagram below.
The network settings are shown on the bottom of the rightmost column which is shown as
above-mentioned diagram.
Users can load one of your default settings to the selected KMU-100 device by one of the
four Preset keys.
Generally speaking, users can find all KMU-100 devices within the same network area by the
DV Link software. After the devices are connected, users can load the Preset settings and
then they can prepare to control the KMU-100 by opening the KMU-100 application
software.
Summary of Contents for KMU-100
