Datavideo KMU-100, Instruction Manual

Page: 53 / 88

53
10. Introduction and Operation of the RMC-185+
KMU Controller
10.1 Introduction of the RMC-185+ KMU Controller
The RMC-185+ is a cost effective physical controller designed specifically for control of the
KMU-100+ 4K Multi-Camera Processor. The RMC-185+ interfaces with the KMU-100+ via an
RS-422 interface.
The RMC-185+ panel style design allows easy control of the KMU-100+ with the hard keys
giving the user quick access to main functions of the KMU-100+. In addition, you can also
use the joystick to move the selected frame view.
10.2 RMC-185+ Features

Remote control of up to eight selected frame views.

Pan, Tilt and Zoom with speed control by joystick.

Storing multiple presets for frame view settings.

Full remote control of the KMU-100+ via RS-422 connection.

An LCD display showing setup menu options.

Two Multiviewer modes (Switcher and KMU modes)

Compact design for easy installation
10.3 Notices for Device Setup
The RMC-185+ is designed to control the KMU-100+. Therefore, before pairing the RMC-
185+ with the KMU-100+, the user should first ensure that the two devices are installed of
the two pieces of firmware as listed below:

KMU-100+: V1.0.14745

RMC-185+: V1.012
After the devices have been successfully upgraded to their corresponding firmware, connect
the power to the RMC-185+ through a power cable. After that, the RMC-185+ (RJ-45) is
connected to the KMU-100+ (DSub) using an RJ-45-to-DSub cable. Finally, turn ON the RMC-
185+ device switch to start manipulating your KMU-100+. See the system diagram below for
the overall system setup.
Note: The communication protocol between the two devices is RS-422.