Datavideo KMU-100, Instruction Manual

Page: 42 / 88

42
Start position to End position).
Q Quad View
Simultaneous display of all four
frames.
Frame selection buttons (Top row)
Press one button (1-8) to select an active frame.
After selecting an active frame, you can press
the same button to switch between Start and
End positions.
Motion operation buttons (Bottom row)
Press one button to start motion of an active
frame and the second button press pauses
motion. Long pressing the same button for
about 2 seconds will stop motion. Button LED
flashes while the motion is in progress. When
the motion is stopped, the button LED will stop
flashing and turn to constant lit.
PTZ Joystick Control
Note: Before attempting to use the joystick to
PAN, TILT or ZOOM a selected frame, first make
sure the LOCK button is not enabled.
PAN – Move the joystick left or right to pan the
selected frame from left to right or vice versa.
TILT – Move the joystick up or down to tilt the
selected frame up or down.
ZOOM – Twist the joystick clockwise (to the
right) or anti-clockwise (to the left) to have the
selected frame zoom in or out.