Datavideo KMU-100, Instruction Manual

Page: 20 / 88

20
You can see the screenshot of the KMU-100 rear panel as shown in the diagram below. One
of the LED locations is indicated by a red arrow .
The LED colors indicating current signal format are displayed on the screen in the top right
corner of the graphics area . The diagram below depicts the LEDs description.
When you move the cursor over the input port icon , a preview of the detected format is
displayed in a nearby window. In this window, properties such as Format, Resolution, FPS
and Mode are displayed as illustrated in the diagram above.
The other ports shown in the
Connection Graphics Area are listed as follows:

Port: 2 x HDMI Video Output (HDMI type A) supporting 1080p60-

For KMU-100: Those two ports allow users to connect to two monitors to show the
Multiview screens of the Channel A and Channel B.

For KMU-100+: Those two ports allow user to connect to two monitors to show the
Multiview screen (HDMI Output B) and PROGRAM screen (HDMI Output A).

Port: Sync Input (Genlock) allows the specification of the reference signal for
synchronization of output channels.

Port: Ethernet RJ45 for control, configuration and firmware updates.