RS20i Installation and Operating Guide
Page 97
RS20i Installation & Operating Guide
Document # 9301H52900 Ver. 1.00
d.
Phantom Center
. Use this if there is no center speaker installed. This divides the center
channel between the left and right speakers. The offset can be adjusted.
11.
Return to the Bass Management Setup screen and tap on Left or Right speaker. This selects the
speaker option for both left and right front speakers:
a.
Large
– (default) select this option if you want LFE channel mixed in with the left and
right channels.
b.
Small
– Select small if you do not want to mix LFE channel with the left and right
channels. A high pass is also inserted for the left and right channels. Select the
frequency and slope for the left and right channel high pass, or disable the high pass
filter.
12.
Return to the Bass Management Setup screen and tap on Left Surround or Right Surround
speaker to select the speaker option for both left and right surround speakers.
a.
Large
– (default) select this option if you want LFE channel mixed in with the left
surround and right surround channels.
b.
Small
– Select this if you do not want to mix LFE channel with the left surround and
right surround channels. A high pass is also inserted for the surround channels. Select
the frequency and slope for the surround channel high pass, or disable the high pass filter.
c.
Phantom Surround
. Use this if there are no surround speakers installed. When selected
the left surround channel is mixed with the left speaker and the right surround is mixed
with the right front speaker. The offset level can be adjusted.
13.
Skip this step if there are no rear surround speakers installed.
Return to the Bass Management Setup screen and tap on Rear Surround Left or Rear Surround
Right speaker. This selects the speaker option for both Rear Surround Left and Rear Surround
Right speakers:
a.
Large
– (default) select this option if you want LFE channel mixed in with the Rear
Surround Left and Rear Surround Right channels.
b.
Small
– Select this if you do not want to mix LFE channel with the Rear Surround Left
and Rear Surround Right channels. A high pass is also inserted for the rear surround
channels. Select the frequency and slope for the rear surround channel high pass, or
disable the high pass filter.
14.
Return to the Bass Management Setup screen and verify the configuration. All speaker
configuration options are described in text next to the speaker. This completes the bass
management setup.
4.3.8.6.2.
Bass Management Setup Screen
The figure below shows the main bass management screen.
