RS20i Installation and Operating Guide
Page 91
RS20i Installation & Operating Guide
Document # 9301H52900 Ver. 1.00
Mid Frequency
Figure 71. Example – Mid Frequency Crossover Setup
As shown in Figure 71, set output channel
2
for the mid range driver. Make sure the input channel is
still set to
1
(or left channel, remember, left = channel 1 in the example).
Set the low pass filter to the mid range driver’s upper crossover point, which in this case is
1200Hz
.
Set the high pass filter to the mid range driver’s lower crossover frequency, which in this case is
350Hz
.
Set the slope to
24dB/octave
.
Set the crossover ID to
M
to identify it as the midrange frequency output for channel two (2).
High Frequency
