manualshive.com logo in svg

Datasat RS20i, Installation And Operating Manual

Share
Download
Datasat RS20i Installation And Operating Manual Download Page 70

 

RS20i Installation and Operating Guide 

 Page 70 

 

 

 

RS20i Installation & Operating Guide  

Document # 9301H52900 Ver. 1.00 

 

4.3.6  Input Options 

The Input Options screen allows changes to Global Delay, Extended Surround Options, Stereo Level and 
Routing, Mic Level and Routing, Matrix and Routing, Decoder Setup, and Digital Cinema Options.  It 
also provides feedback on the current Audio input.  

The options on this screen will change according to the currently selected input source.   

Setup (System) > Inputs > Input Options 

 

Figure 47. Input Options Screen 

 

4.3.6.1  Global Delay and Surround Offset 

Setup (System) > Inputs > Input Options > Global Delay and Surround Offset 

 

Figure 48. Global Delay and Surround Offset 

The Global Delay and Surround Offset screen is available for all input sources. 

Summary of Contents for RS20i












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands