RS20i Installation and Operating Guide
Page 46
RS20i Installation & Operating Guide
Document # 9301H52900 Ver. 1.00
2.11 Subwoofer EQ – Parametric EQ
The RS20i features Parametric EQ on every channel. Parametric EQ is an optional adjustment and is in
addition to 1/3 Octave EQ. It is only available with low frequencies and offers more control than 1/3
Octave EQ. The Parametric EQ screen looks similar to the 1/3 Octave EQ screen but displays a
frequency range from 20 to 200Hz only. The screen has the same selections (Channel select, etc.) but
also has controls for three filters.
Setup (System) > Inputs > Audio EQ Setup > Parametric Equalization
The three filters can be configured regarding Q and Frequency, and are either enabled or disabled.
To select a filter, highlight the
Filter
button and rotate the adjustment knob to select from
the three filters.
To adjust
Q
,
Freq
, or to
enable/disable
, select the control and rotate the adjustment knob.
Filter disabled
in effect turns off Parametric EQ.
Figure 27. Parametric EQ Screen, Filter Enabled
2.12 Copy EQ Set to Another EQ Set
This screen is used to copy the EQ settings for all channels to a new EQ set under a new name. After
equalizing all the channels, copy these settings to create another EQ (with a new name).
