RS20i Installation and Operating Guide
Page 56
RS20i Installation & Operating Guide
Document # 9301H52900 Ver. 1.00
Digital Out Clock Rate
– When interfacing with external digital equipment select appropriate clock rate
to match that equipment. Select from the following options:
48 kHz
96 kHz
192 kHz
Output Mapping –
Option to duplicate channels 1-8 on channels 9-16:
Standard 16 Ch Out
– Standard output channel assignments.
Copy Ch 1-8 to Ch 9-16
– The output of channels 1 through 8 will be
copied
to output
channels 9 through 16 for both the Analog output connector and Digital output connector.
Output channels 9-16 are not assignable if this option is used.
Volume Control
– The Volume control knob controls the playback level in the theater.
Using the buttons along the bottom of the System Setup screen, you can update the processor software
via the internet, save and restore configurations through the USB interface, assign password protections,
view a log file of system status messages, and check the status of the hardware in real time.
4.2.1 Updating Your RS20i Software
There are two ways you can update your software. The first way, is to connect to the servers at Datasat
Digital Entertainment to select and install the update. This requires that the RS20i is connected to the
Internet. The second way is to install the update from a
USB Device
. Both methods are described in
more detail below.
Setup (System) > Update System Software
Figure 31. System Software Update Screen
4.2.1.1 Update System Software from Network
The following steps describe how to update your RS20i software through the internet.
