RS20i Installation and Operating Guide
Page 58
RS20i Installation & Operating Guide
Document # 9301H52900 Ver. 1.00
4.2.2 Saving and Restoring Configuration Files
You can save and restore standard configurations and master configurations to a USB Flash drive
(memory stick). You can also save Diagnostic information (the system log file) for use in
troubleshooting the system.
A
master configuration
is intended to be a template used to configure similar RS20is in a system. It is
used as the first step in creating the configuration of each installed unit. Copy the master configuration
file from one RS20i and load it via USB into all RS20i units.
Note
: Always be careful, as any existing Master Configuration file on the USB will be
overwritten when you save another one.
The
standard configuration
is specific to one RS20i. This contains the unique third octave EQ,
DiracEQ, inputs, output preset, automation, and global configurations needed for that RS20i. The
standard configuration file can only be loaded back onto the same RS20i.
You can also load a screensaver of your choice via the USB port.
To set any of these options, insert the USB Flash drive into the front panel and then press the
USB
Save/Restore
button on the System Setup screen. (If no Flash drive is present, a message will appear
prompting you to insert a USB device.)
Setup (System) > System Setup > USB Save/Restore
Figure 33. USB Save/Restore Screen
Select an activity on the left, then touch
Copy
on the right.
