W-Class
89
Printing Specifications (continued)
SDRAM Memory:
16 MB
Flash Memory:
2 MB
Maximum Print Width:
6.40” (162.6 mm) W-6308
6.62” (168.1 mm) W-6208
8.53” (216.7 mm) W-8306
Minimum Print Width:
2.0” (50.8 mm) W-6208, W-6308
3.0” (76.2 mm) W-8306
Print Length Range:
with an optional cutter:
.5” – 99.99” (12.7 mm – 2539.7 mm)
1.5” – 99.99” (38.1 mm – 2539.7 mm)
Print Justification:
Left
7.1
Media and Ribbon Requirements
Media Types:
Roll-fed, die-cut, continuous, and fan-fold. Flat on
the printable side with no more than .0007”
(.018 mm) protrusions on the opposite side.
Maximum Media Roll OD
*
: 8” (203.2 mm) outer diameter
Media Core Size
**
:
1.5” or 3.0” (38 mm or 76.2 mm)
Ribbon Core Size:
1.010”
±
.006” (25.65 mm
±
.15 mm) – core not to
protrude beyond ribbon edge.
Ribbon Width Range
***
:
2.0”– 6.7” (50.8mm – 170.1mm) W-6208, W-6308
3.0” – 9.0” (76.2 mm – 228.6 mm) W-8306
Maximum Ribbon Length:
1509’ (460 Meters) maximum
*
Labels wound out only
**
Media Supply Hub dependent
***
Ribbon wound ‘coating side in’ only and width should always slightly exceed the label
width (including backing material, if any).
Approved Media
To achieve optimum print quality and maximum printhead life, DATAMAX
brand media and ribbons are recommended. These supplies are specially
formulated for use in this printer. The use of non-Datamax supplies may affect
the print quality, performance, and life of the printer or its components (see the
Warranty Statement). Consult Section 2.1 for an overview of the different media
and ribbon types. For a current list of approved media and ribbons, contact a
Media Representative at (407) 523-5650.
Summary of Contents for W-6208
