Datamax W-6208, Operator'S Manual

Page: 29 / 132

W-Class 19
3.5.2 Rewinding onto a Core
With the Internal Rewind option, the printed labels and backing material can be
wound directly onto Media Cores. To rewind labels and backing onto cores:
å
Load media as described
in Section 3.1.

Remove the Tear Bar
and install the Arc Plate;
see pictorial, Section
3.5.1.
ê
If attached, remove the
Media Retainer from the
Media Rewind Hub.
‚
Position the Core Adapters to support, but not extend beyond the Media
Core. Tighten in the adapters in place with the Thumbscrews.
ƒ
Slide an empty Media Core over the Core Adapters.
ñ
Guide the media onto the Media Rewind Hub as shown. Place the leading
edge of the media into the Media Core and secure using tape.
ò
Slide the Media Retainer onto the hub; position it just to the edge of the
media and tighten the Thumbscrew. Close the Access Cover.