Datamax Prodigy, Operator'S Manual

Page: 30 / 146

________________________________________________________
__
Page - 22
Setup and Self Test
The Printer is also manufactured for 230 VAC operation. Most of these
Printers are shipped to international markets. If you are at all uncertain
about the configuration of the Printer, or the outlet you are connecting
to, check with a qualified service technician to verify the installation
before connecting power.
3.2 Installing Print Media
The Printer is designed for easy label stock and ribbon installation. A
diagram located under the cover of the Printer shows the feed path for
print media(s). Simply lift the cover of the printer from the right-hand
side and open the front cover for installation instructions.
Media Loading Instructions:
1. Slide the Media Retainer to the outer end of the Supply Hanger,
and fold the Media Retainer to its down position.
2. Place a roll of the chosen media onto the Supply Hanger. Rotate
the Media Retainer to its up position and slide it inward until its
just touching the roll of media.
Figure 3-1 Installing Roll Media