Datamax Prodigy, Operator'S Manual

Page: 107 / 146

________________________________________________________
__
Using the Printer's Internal Labeling Software Page - 99
4. PRINT TEST LABEL. Prints a head test label. Used as a relative
gauge of head condition and wear.
5. SYSTEM TEST LABEL. Lists all current Printer settings and checks
both ROM and RAM. Prints a head test label after the system test.
6. TEST MODULE. Tests a memory module to see if the battery is
functioning and that it is capable of erasing and loading data.
WARNING: this test destroys all existing memory module data!
Follow the prompts to perform the test.
7. RESET PRINTER. Same as turning the main power switch on and
off. Resets the Printer’s processor circuit. Used if the processor
locks up or “goes off in the weeds” due to a power surge, spike, or
other power line interference.
8. EXIT TO RS-232 SYSTEM. Same as turning DIP switch SW-1, #5
off and turning main power switch off and on. Useful if connecting
an A/B switch box to the CRT and a PC at the same time for
downloading graphic images to memory modules.