Dataman 40PRO, User Manual

Page: 96 / 168

96
Split settings described above mean split of serial number into fragments with 16 bit (2 bytes)
size to buffer with gap of 2 bytes between fragments. The correct serial number is set tightly
before device programming operation starts.
The buffer content of serial number when programming the first device will be:
Address Data
0000800 56 34 00 00 12 00 00 00 xx xx xx xx xx xx xx xx
The second device will have:
Address
Data
0000800 57 34 00 00 12 00 00 00 xx xx xx xx xx xx xx xx
Next devices will have same format of serial number incremented by 1 for each device.
Example 3:
Following example uses the same serialization options as Example number 2a; instead the
serial number Split gap is set to 2 and 3.
When Split gap is set to 2 bytes, the buffer content will look as following:
Byte buffer organization:
Address Data
0000080 CD xx xx AB xx xx 34 xx xx 12 xx xx xx xx xx xx
Word16 buffer organization:
Address Data
0000040 xxCD ABxx xxxx xx34 12xx xxxx xxxx xxxx
When Split gap is set to 3 bytes, the buffer content will look as following:
Byte buffer organization:
Address Data
0000080 CD xx xx xx AB xx xx xx 34 xx xx xx 12
Word16 buffer organization:
Address Data
0000040 xxCD xxxx xxAB xxxx xx34 xxxx xx12 xxxx
Note: When you are not sure about effects of serialization options, there is possible to test the
real serial number, which will be written to buffer. The test can be made by following steps:
1. select wished serialization options in dialog Serialization and confirm these by OK button
2. in dialog Device operation options set Insertion test and Device ID check (if available) to
Disabled
3. check there is no device inserted to programmer’s ZIF socket
4. run Device Program operation (for some types of devices it is necessary to select
programming options before programming will start)
5. after completing programming operation (mostly with some errors because device is not
present) look at the main buffer (View/Edit buffer) at address where serial number should
be placed
Note: Address for Serialization is always assigned to actual device organization and buffer
organization that control program is using for current device. If the buffer organization is byte