Dataman 40PRO, User Manual

Page: 166 / 168

166
Troubleshooting
We really want you to enjoy our product. Nevertheless, problems can occur. In such cases
please follow the instructions below.
It might be your mistake in properly operating the programmer or its control program
PG4UW.
Please read carefully all the enclosed documentation again. Probably you will find the
needed answer right away.
Try to install programmer and PG4UW on another computer. If your system works
normally on the other computer you might have a problem with the first one PC. Compare
differences between both computers.
Ask your in-house guru (every office has one!).
Ask the person who already installed programmer.
If the problem persists, please call the local dealer, from whom you purchased the
programmer, or call DATAMAN direct. Most problems can be solved by phone, e-mail or fax.
If you want to contact us by:
Mail/fax - Copy the " DEVICE PROBLEM REPORT " form and fill it in following the
instructions at the end of the form. Write everything down that you consider being relevant
about the programmer, software and the target device. Send the completed form by mail or
fax to DATAMAN (fax number in the control program, menu
Help / About ) or to your local
dealer. If you send the form by fax please use black ink, a good pen and large letters!
E-mail - Use " DEVICE PROBLEM REPORT " form on the CD or from our Internet site and
fill it in following the instructions at the end of the form. Use standard ASCII editor. Write
everything down that you consider being relevant about the programmer, software and the
target device. Send the completed form by e-mail to your local dealer or to DATAMAN (
(no
spam version) DATAMAN at DATAMAN dot com ).
Phone - Copy " DEVICE PROBLEM REPORT " form and fill it in following the instructions
at the end of the form. Write everything down that you consider being relevant about the
programmer, software and the target device. Send the completed form by mail or fax to
DATAMAN (fax number in the control program, menu
Help / About ) or to your local
dealer. If you send the form by fax please use black ink, a good pen and large letters
easily to read. Then call your local dealer or DATAMAN customer support center (phone
number in the control program, menu
Help / About ). Please keep your manual, the
programmer and the completed " DEVICE PROBLEM REPORT " form (just faxed)
available, so that you can respond quickly to our questions.
If your programmer is diagnosed as defective, consult your local dealer or DATAMAN about
the pertinent repair center in your country. Please carefully include the following items in the
package:
defective product
completed "
DEVICE PROBLEM REPORT " form
photocopy of a dated proof of purchase
Without all these items we cannot admit your
programmer to repair.