Dataman 40PRO, User Manual

Page: 18 / 168

18
DATAMAN-448PRO2 performs device insertion test based on the check of proper signal
path between the programmer and programmed device before it programs each device. In
dependence on programming configuration it identifies missed or poor contact between
programmed device and the ZIF socket of the programming adapter (or the programmer
directly), missed or poor contact between the programming adapter and the programmer and
it's also able to indicate
wrong position of device in the ZIF socket of the programmer / the
programming adapter (moved, rotated, backward oriented). These capabilities, supported by
overcurrent protection and signature-byte check help prevent chip damage due to operator
error.
DATAMAN-448PRO2 have the selftest capability, which allows run diagnostic part of software
to thoroughly check the health of the each programming module.
DATAMAN-448PRO2 have a built-in protection circuits for eliminate damage of programmer
and/or programmed device due to environment or operator failure. All ZIF socket pins of
DATAMAN-448PRO2 programmer are
protected against ESD up to 15kV.
When programming specification require, the ( DATAMAN-448PRO2 ) programmer performs
programming verification at the marginal level of supply voltage, which, obviously, improves
programming yield, and guarantees long data retention.
Various socket converters are available to handle device in PLCC, SOIC, PSOP, SSOP,
TSOP, TSSOP, TQFP, QFN (MLF), SDIP, BGA and other packages.
DATAMAN-448PRO2 programmer is driven by an easy-to-use control program with pull-down
menu, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer
or simply by typing a fragment of vendor name and/or part number.
Standard device-related commands (read, blank check, program, verify, erase) are boosted
by some test functions (insertion test, signature-byte check), and some special functions
(autoincrement, production mode - start immediately after insertion of chip into socket).
All known data formats are supported. Automatic file format detection and conversion during
load of file.
The rich-featured autoincrement function enables to assign individual serial numbers to each
programmed device - or simply increments a serial number, or the function enables to read
serial numbers or any programmed device identification signatures from a file.
The software also provides a lot of information about programmed device. As a special, the
drawings of all available packages , explanation of chip labeling (the meaning of prefixes
and suffixes at the chips) for each supported chip are provided.
The software provide full information for ISP implementation: Description of ISP connector pins
for currently selected chip, recommended target design around in-circuit programmed chip and
other necessary information.
The remote control feature allows PG4UW software to be flow controlled by other application
– either using .BAT file commands or using DLL file. For DATAMAN-448PRO2 is remote
control limited for ISP programming only. Please use DATAMAN-448PRO2AP for automated
off line programming.