Dataman 40PRO, User Manual

Page: 32 / 168

32
DATAMAN-48PRO2 / DATAMAN-48PRO2C performs device insertion test based on the
check of proper signal path between the programmer and programmed device before it
programs each device. In dependence on programming configuration it identifies missed or
poor contact between programmed device and the ZIF socket of the programming adapter (or
the programmer directly), missed or poor contact between the programming adapter and the
programmer and it's also able to indicate
wrong position of device in the ZIF socket of the
programmer / the programming adapter (moved, rotated, backward oriented). These
capabilities, supported by
overcurrent protection and signature-byte check help prevent
chip damage due to operator error.
The selftest capability allows running diagnostic part of software to thoroughly check the health
of the programmer.
Built-in protection circuits eliminate damage of programmer and/or programmed device due
environment or operator failure. All the inputs of the DATAMAN-48PRO2 /
DATAMAN-48PRO2C programmer, including the ZIF socket, ISP connector, connection to PC
and power supply input, are
protected against ESD up to 15kV.
When programming specification require, the ( DATAMAN-48PRO2 / DATAMAN-48PRO2C )
programmer performs programming verification at the marginal level of supply voltage, which,
obviously, improves programming yield, and guarantees long data retention.
Various socket converters are available to handle device in PLCC, SOIC, PSOP, SSOP,
TSOP, TSSOP, TQFP, QFN (MLF), SDIP, BGA and other packages.
DATAMAN-48PRO2 / DATAMAN-48PRO2C programmer is driven by an easy-to-use control
program with pull-down menu, hot keys and on-line help. Selecting of device is performed by
its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.
Standard device-related commands (read, blank check, program, verify, erase) are boosted
by some test functions (insertion test, signature-byte check), and some special functions
(autoincrement, production mode - start immediately after insertion of chip into socket).
All known data formats are supported. Automatic file format detection and conversion during
load of file.
The rich-featured autoincrement function enables to assign individual serial numbers to each
programmed device - or simply increments a serial number, or the function enables to read
serial numbers or any programmed device identification signatures from a file.
The software also provides a lot of information about programmed device. As a special, the
drawings of all available packages , explanation of chip labeling (the meaning of prefixes
and suffixes at the chips) for each supported chip are provided.
The software provide full information for ISP implementation: Description of ISP connector pins
for currently selected chip, recommended target design around in-circuit programmed chip and
other necessary information.
The remote control feature allows being PG4UW software flow controlled by other application
– either using .BAT file commands or using DLL file. DLL file, examples (C/PAS/VBASIC/.NET)
and manual are part of standard software delivery.