Dataman 40PRO, User Manual

Page: 28 / 168

28
Programming speed
DATAMAN-448PRO2
Device Size [bits] Operation Time
K8P6415UQB (parallel NOR Flash) 400100hx16 bit (64 Mega) programming and verify 13 sec
MT29F1G08ABAEAWP (parallel NAND Flash) *2 8400000Hx8 (1 Giga) programming and verify 51 sec
THGBM3G4D1FBAIG (eMMC NAND Flash) *2 2048 MB x8 (16 Giga) programming *1 363 sec
QB25F640S33 (serial Flash) 800200Hx8 (64 Mega) programming and verify 30.7 sec
AT89C51RD2 (microcontroller) 10000Hx8 programming and verify 14.4 sec
PIC32MX360F512L (microcontroller) 80000Hx8 programming and verify 8.9 sec
Conditions: Intel Core2Duo 6300 1.86GHz, 1GB RAM, USB 2.0 HS, Win XP, software
PG4UW v3.03.
*1 Implementation is the same as in card readers. Verification of programming is
performs internal controller. Internal controller confirms the proper programming
using status register.
*2 The programming time is for TurboMode active.
SOFTWARE
Algorithms: only manufacturer approved or certified algorithms are used.
Algorithm updates: software updates are available regularly, approx. every 4 weeks, free of
charge (Internet download). OnDemand version of software is available for highly needed
chips support and/or bugs fixes. Available nearly daily.
Main features: revision history, session logging, on-line help, device and algorithm
information
Device operations
standard:
intelligent device selection by device type, manufacturer or typed fragment of part name
automatic ID-based selection of EPROM/Flash EPROM
blank check, read, verify
program
erase
configuration and security bit program
illegal bit test
checksum
interpret the Jam Standard Test and Programming Language (STAPL), JEDEC standard
JESD-71
interpret the VME files compressed binary variation of SVF files
security
insertion test
contact check
ID byte check
special
production mode (automatic start immediately after device insertion)
lot of serialization modes (more type of incremental modes, from-file mode, custom
generator mode)
statistic
count-down mode