SC4000 REFERENCE MANUAL
6
6.2 SC4000 ID-NET™ MULTIDATA MASTER TO SERIAL HOST
ID-NET™ Slave Nodes
CBX100
CBX100
CBX100
SC4000
Reader ID-NET™ Interface
SC4000 ID-NET™ Interface
SC4000 Host 1 or Host 2 Serial Interface
Aux Interface for SC4000 Configuration
and Genius-compatible Slave Reader
Configuration through ID-NET
1
1
1
3
4
5
PS
I/O
PS
I/O
2
Host
6
DS4800
5
5
DS2100N
Matrix 400™
Reader Auxiliary Interface for Reader
Configuration
Reader in Pass Through on Host 2 or
Source Auxiliary Interface
Power
I/O
PS
Layout
SC4000
Parameters
ID-NET™ Multidata
Master
to Serial Host
(ex: Host 1 to external
Host, HHR to Host 2)
Note
Net Type Rotary Switch
0
Address rotary
switches are ignored
Topology Role
Master (MULTIDATA)
System Layout / Host 1 Serial Port Type
Serial
Communication Settings / Host 1 Serial Port /
Line Parameters / Communication Protocol
Standard
Communication Settings / Host 1 Serial Port /
Line Parameters / (Electrical Interface, Baud
Rate, Parity, Data Bits, Stop Bits)
Aligned to the Host
configuration
Communication Settings / Host 2 Serial Port /
Line Parameters / Communication Protocol
Standard
Data Source device to
Host 2
Communication Settings / Host 2 Serial Port
/ Line Parameters/ (Electrical Interface, Baud
Rate, Parity, Data Bits, Stop Bits)
Aligned to the Data
Source device
configuration
Data Source device to
Host 2
Communication Settings / Host 2 Serial Port /
Data Pass Through
<checked>
Data Source device to
Host 2
Communication Settings / Host 2 Serial Port /
Data Pass Through Options / Data
Destination: Host 1 Serial Port
<checked>
Data Source device to
Host 2
Communication Settings / Host 2 Serial Port /
Data Pass Through Options / Termination
String
Aligned to the Data
Source device
configuration
Data Source device to
Host 2
36
