SC4000 REFERENCE MANUAL
6
Communication Settings / Host 2 Serial Port
/ Line Parameters/ (Electrical Interface, Baud
Rate, Parity, Data Bits, Stop Bits)
Aligned to the Host
configuration
Communication Settings / Auxiliary Serial
Port / Data Tx
<checked>
Communication Settings / Auxiliary Serial
Port / Line Parameters/ (all parameters)
Aligned to the Genius Pc
configuration
6.4 SC4000 ID-NET™ MULTIDATA MASTER/FIELDBUS SLAVE TO HOST
FIELDBUS MASTER
ID-NET™ Slave Nodes
CBX100
CBX100
CBX100
Power
SC4000
1
1
3
4
5
PS
I/O
PS
I/O
2
DS4800
5
DS2100N
Matrix 400™
1
5
I/O
PS
Host
Fieldbus Master
6
Reader ID-NET™ Interface
SC4000 ID-NET™ Interface
SC4000 Host 1>BMxxx
Fieldbus Module
Aux Interface for SC4000 Configuration and Genius-
compatible Slave Reader Configuration through ID-NET
Reader Auxiliary Interface for Reader Configuration
Reader in Pass Through on Host 2 or Source Auxiliary
Interface
Layout
SC4000
Parameters
ID-NET™ Multidata
Master/Fieldbus Slave
to Host Fieldbus Master
(ex: PROFIBUS)
Note
Net Type Rotary Switch
2
Fieldbus Interface
Board =
BM3x0
Address Rotary Switches
X100 = 0, 1
X10 = 0..9
X1 = 0..9
Address Range=
00..126
(
Aligned to the
Fieldbus Master
configuration
)
Topology Role
Master (MULTIDATA)
System Layout / Host 1 Serial Port Type
Profibus
Communication Settings / Gateway / Status
<checked>
38
