Datalogic Gryphon I GM440 Series, Product Reference Manual

Page: 225 / 350

China Sensible Code Enter/Exit Programming Mode
Product Reference Guide 215
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for China Sensible Code
Length Control . Length 2 is the maximum label length if in Variable Length
Mode, or the second fixed length if in Fixed Length Mode. Characters can be
set from 0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See
page 283 for detailed instructions on setting this feature.
$CCSL2
Select China Sensible Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
r
epresenting
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
~
DEFAULT
Length 2 is 7,827 Characters