Datalogic Gryphon I GM440 Series, Product Reference Manual

Page: 39 / 350

CLEANING PROCEDURE
Product Reference Guide 29
5. Replace the battery holder and three screws, plug in the connector, and
return the contacts circuit to its previous location.
When inserting the new battery into the handle, take care to position the bat-
tery and the connector as shown.
6. Insert the cover in the handle and screw it back into place.
Battery replacement is now complete.
CLEANING PROCEDURE
Proper cleaning is needed on the external plastic surfaces, output window
and electrical contacts to guarantee reliable scanning and charging of the
battery.
A regular cleaning routine will remove the dust and dirt that may accumulate
on the product over time. The maintenance activity may be repeated more
frequently depending on the severity of the environment in which the scan-
ner is used.
A periodic deeper cleaning is suggested once per month.
Cleaning plastic surfaces
Exterior plastic surfaces and scan windows exposed to spills, smudges or
debris require periodic cleaning to ensure best performance during scan-
ning. Use a soft, dry cloth to clean the product.
If the product is very soiled, clean the plastic surfaces with a soft cloth
moistened with a diluted non-aggressive cleaning solution or isopropyl
alcohol (minimum 70%).