Datalogic Gryphon I GM440 Series, Product Reference Manual

Page: 120 / 350

Enter/Exit Programming Mode
110 Gryphon™ I GD44XX/GBT4400/GM440X
Partial Label Reading Control
Enable/Disable to ignore partial labels to be read within the boundary of the
field of view.
Partial Label Reading Control = Disable
Partial Label Reading Control = Enable
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies.
When this feature is enabled, you will be unable to read normally-printed
labels or programming labels in this manual. Scan the “Disable” bar code
below to return the scanner to its default for this feature. To set decoding
for only 2D codes, go to " 2D Normal/Inverse Symbol Control" on page 217 .
For additional options, see the Aladdin configuration application.
IPPL00
IPPL01
Unlike some programming features and options, Decode Negative Image
selections require that you scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scanning a Decode Negative
Image bar code.
CAUTION
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
Decode Negative Image = Disable
Decode Negative Image = Enable
$P,CIPVR00,P(CR)
DEFAULT
$P,CIPVR01,P(CR)