Datalogic Gryphon I GM440 Series Product Reference Manual Download Page 12

Page: 12 / 350

Introduction

Gryphon™ I GD44XX/GBT4400/GM440X

Manual Conventions

The following conventions are used in this document:
The symbols listed below are used in this manual to notify the reader of key

issues or procedures that must be observed when using the reader:

References

Current versions of this Product Reference Guide (PRG), Quick Reference

Guide (QRG), the Datalogic Aladdin™ Configuration application, and any

other manuals, instruction sheets and utilities for this product can be down-

loaded from the website listed below. Alternatively, printed copies or prod-

uct support CDs for most products can be purchased through your Datalogic

reseller.

Technical Support

Datalogic Website Support

The Datalogic website (

www.datalogic.com

) is the complete source for tech-

nical support and information for Datalogic products. The site offers product

support, warranty information, product manuals, product tech notes, soft-

ware updates, demos, and instructions for returning products for repair.

Reseller Technical Support

An excellent source for technical assistance and information is an autho-

rized Datalogic reseller. A reseller is acquainted with specific types of busi-

nesses, application software, and computer systems and can provide

individualized assistance.

Telephone Technical Support

If you do not have internet or email access, you may contact Datalogic tech-

nical support at (541) 349-8283 or check the back cover of your manual for

more contact information.

Notes contain information necessary for properly diagnosing,
repairing and operating the reader.

CAUTION

The CAUTION symbol advises you of actions that could damage
equipment or property.

Summary of Contents for Gryphon I GM440 Series































































































































































































































































































































































Search results

Summary of Contents for Gryphon I GM440 Series

Reviews:

Related manuals for Gryphon I GM440 Series

Brands by name

Popular brands

Datalogic Gryphon I GM440 Series, Product Reference Manual

Search results

Summary of Contents for Gryphon I GM440 Series

Reviews:

Related manuals for Gryphon I GM440 Series

Brands by name

Popular brands