Datakom D-500, User Manual

Page: 48 / 153

D-500 User Manual Rev_06 Firmware V-5.8
K35D05-EN - 48 -
Term Function Technical data Description
1 BATTERY POSITIVE +12 or 24VDC The positive terminal of the DC Supply.
2 - - Do not connect this terminal.
3 BATTERY NEGATIVE O VDC Power supply negative connection.
Term Function Technical data Description
4 DIGITAL OUTPUT 1
Protected
Semiconductor
Outputs
1A/28VDC This relay has programmable function,
selectable from a list. Factory set as
CRANK output.
5 DIGITAL OUTPUT 2
This relay has programmable function,
selectable from a list. Factory set as
FUEL
output.
6 DIGITAL OUTPUT 3
This relay has programmable function,
selectable from a list. Factory set as
ALARM output.
7 DIGITAL OUTPUT 4 This relay has programmable function,
selectable from a list. Factory set as
PREHEAT output.
8 DIGITAL OUTPUT 5
This relay has programmable function,
selectable from a list. Factory set as
STOP
output.
9 DIGITAL OUTPUT 6 This relay has programmable function,
selectable from a list. Factory set as
IDLE
SPEED output.
10 CHARGE Input and output
Connect the charge alternator’s D+
terminal to this terminal. This terminal will
supply the excitation current and measure
the voltage of the charge alternator.
11 DIGITAL INPUT 1 Digital Inputs,
0-30Vdc The input has programmable function.
Factory set as
LOW OIL PRESSURE
SWITCH .
12 DIGITAL INPUT 2
The input has programmable function.
Factory set as
HIGH TEMP SWITCH .
7. TERMINAL DESCRIPTION