Datakom D-100 MK2, User Manual

Page: 47 / 123

D-100 MK2 User Manual Firmware V-6.3
K96D01-EN - 47 -
The unit performs a detailed set of AC measurements.
Mains currents and power parameters (listed in blue color) are measured and displayed only if CTs are
placed at load side. please see connection diagrams section for more details.
The list of measured AC parameters is below:
Gen voltage phase L1 to neutral
Gen voltage phase L2 to neutral
Gen voltage phase L3 to neutral
Gen average voltage phase to neutral
Gen voltage phase L1-L2
Gen voltage phase L2-L3
Gen voltage phase L3-L1
Gen frequency
Gen current phase L1
Gen current phase L2
Gen current phase L3
Gen average current
Gen kW phase L1
Gen kW phase L2
Gen kW phase L3
Gen total kW
Gen kVA phase L1
Gen kVA phase L2
Gen kVA phase L3
Gen kVAr phase L1
Gen kVAr phase L2
Gen kVAr phase L3
Gen pf phase L1
Gen pf phase L2
Gen pf phase L3
Gen total pf
Gen Neutral current
Below engine parameters are always measured:
Engine speed (rpm)
Battery voltage,
The unit features 3 analog senders, fully configurable for the name and function.
Below is a typical list of analog senders, capable of changing following configuration:
Coolant temperature
Oil pressure (bar, kPa)
Fuel level (%, lt)
9.5. MEASURED PARAMETERS