DM-
SV01 Server ● BMC User Manual ● Rev. 2.1
91
Reply
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_0_0.Message",
"Message": "Successfully Completed Request",
"MessageArgs": [],
"MessageId": "Base.1.4.0.Success",
"Resolution": "None",
"Severity": "OK"
}
]
}
Once the operation is successful, it returns the response “200 OK” and the peak power sensor reset is
performed.
Figure 87: Redfish - Reset Peak Power Sensor
Important:
if the “Peak Power” sensor is not available in the BMC, please update the BMC SW by
following the procedure described in section 2.4.2.2 FW update process - BMC or BIOS.
