DM-
SV01 Server ● BMC User Manual ● Rev. 2.1
26
Figure 24: ID LED position in the DM-SV01 front panel
Important:
the ID LED can also be physically activated by means of the ID button - details of this
functionality can be found at the “DM-SV01 Product Manual” (1). When the ID LED is turned on or off
by means of the ID button, the “Server LED light” button in the BMC web GUI will update its status only
after the web page is refreshed.
2.3.3 Reboot BMC
The button shown in Figure 25 is used to reboot the BMC. Please note that the BMC and the host
processors are independent of each other, so rebooting the BMC will not affect the CPUs, memories,
disks and the workloads running on them. The only effect is that the user will lose access to the
management functionalities from the BMC while it is in the reboot process.
The reboot process also does not reset any configuration from the BMC. All the settings (including
network configuration) and event log information will be preserved and the BMC web management
interface will be available again as soon as the BMC completes the booting phase.
Figure 25: Reboot BMC menu
