Datacom Systems VS-1200-S Series User Manual Download Page 37

Page: 37 / 90

Initial Configuration

Step 13.

Type

Exit

to save the network address changes and press the

Enter

key to end the

connection session indicated by 'Connection closed' response.

Step 14.

Close HyperTerminal, respond 'Yes' to the "You are currently connected. Are you sure

you want to disconnect now?' prompt and respond 'Yes, No or Cancel,' as you prefer, to the "Do
you want to save the connection named "Connect"?" prompt.

Step 15.

Disconnect the DRL512-2M-R serial cable.

Step 16.

Install the VS-1200-S series in your chosen network location.

4.4.2

IP Address Configuration with TELNET

The IP address of the configurable series can be configured via a RJ45 connection with a

TELNET

application (available on most Windows PCs) or an open source free software terminal emulator for
MS-Windows.

Step 1.

Connect the VS-1200-S with one of the supplied switching AC adapters and AC line cords

into an external power source. Either

POWER 1

LED illuminates

green

indicating power is

available from the connected source. The other

POWER

LED is not illuminated, indicating a lack of

power to the unconnected DC power socket.

Step 2.

Using a cross-over Cat 5e cable, connect one end to the VS-1200-S

MANAGEMENT

port

and the other end to the RJ45 port on your management PC.

Summary of Contents for VS-1200-S Series



























































































Search results

Summary of Contents for VS-1200-S Series

Reviews:

Related manuals for VS-1200-S Series

Brands by name

Popular brands

Datacom Systems VS-1200-S Series, User Manual

Search results

Summary of Contents for VS-1200-S Series

Reviews:

Related manuals for VS-1200-S Series

Brands by name

Popular brands