Datacom Systems VS-1200-S Series User Manual Download Page 69

Page: 69 / 90

Appendix A - Agent Capabilities MIB

VARIATION ifAdminStatus
ACCESS read-only
DESCRIPTION "values change according to the
corresponding value of ifOperStatus
as follow:

ifAdminStatus ifOperStatus
------------- ------------
up(1) up(1)
down(2) down(2)
down(3) unknown(4)
"

VARIATION ifOperStatus
ACCESS read-only
DESCRIPTION "only the following states are
implemented:
up(1)
down(2)
unknown(4)
"

VARIATION ifAlias
ACCESS not-implemented
DESCRIPTION "not implemented"

SUPPORTS DATACOM-POWER-SUPPLY-MIB
INCLUDES {
dcomPowerSupplyStatusGroup,
dcomPowerSupplyEventGroup
}

::= { agentCaps 2 }

END

6. Acknowledgments

The production and maintenance of this memo is a group effort of the
Datacom development team.

7. Security Considerations

This module does not define any management objects. Instead, it defines
the top level assignments within the Datacom enterprise name space.

Summary of Contents for VS-1200-S Series



























































































Search results

Summary of Contents for VS-1200-S Series

Reviews:

Related manuals for VS-1200-S Series

Brands by name

Popular brands

Datacom Systems VS-1200-S Series, User Manual

Search results

Summary of Contents for VS-1200-S Series

Reviews:

Related manuals for VS-1200-S Series

Brands by name

Popular brands