Datacom Systems VS-1200-S Series User Manual Download Page 64 | Manualshive

Page: 64 / 90

background image

VS-1200-S Data Acccess Switch

64

© 2011 Datacom Systems Inc

1. Introduction

This memo defines a set of agent identities used to identify Datacom
SNMP agents and a set of agent capabilities used to convey the
capabilities of Datacom SNMP Agents.

2. The Internet-Standard SNMP Management Framework

For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].

Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).

Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a
MIB module that is compliant to the SMIv2, which is described in STD
58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC
2580 [RFC2580].

3. Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].

4. Overview of the Datacom Agent Capabilities MIB Module

This MIB module contains OBJECT-IDENTITY definitions used to
identify Datacom SNMP agents and contains AGENT-CAPABILITIES
statements used to express the capabilities of Datacom SNMP agents.

Each set of definitions is described in the following sections.

4.1 Agent Identities

The identity of a Datacom SNMP agent is exposed as the value of the
sysObjectID object. For additional information about the definition
of sysObject, see the SNMPv2-MIB [RFC 3418].

Datacom agent identities are defined within the Datacom agentIdents
subtree.

«
...
62
63
64
65
66
...
»

Summary of Contents for VS-1200-S Series



























































































Reviews:

No comments

Related manuals for VS-1200-S Series

Brand: Zamel Pages: 2

Brand: Hama Pages: 2

Brand: Dahua Pages: 17

Brand: Taiden Pages: 21

SmartStack STS16-20R

Brand: Cabletron Systems Pages: 258

Brand: MicroNet Pages: 123

Brand: Airlinkplus Pages: 2

Sun Datacenter InfiniBand Switch 36

Brand: Sun Oracle Pages: 12

Brand: AV Link Pages: 2

DCRS-5200 Series

Brand: Digital China Networks Pages: 4

ENTERTAINMENT HUB

Brand: Ev-ent Hire Pages: 5

Master View CS-172

Brand: ATEN Pages: 1

Brand: Wyrestorm Pages: 4

Brand: EG Pages: 22

Brand: Brocade Communications Systems Pages: 54

Brand: Novatek-electro Pages: 8

Brand: SyncAV Pages: 2

Brand: Icy Box Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands