Datacolor Ahiba Ahiba MULTIPRECISE TC, User Manual

Page: 44 / 103

ahiba 43
AHIBA Multiprecise Dosing - Manual Mode
Manual Mode
1 Before beginning a process:
- Ensure dosing tubes have been primed with
water.
- Insert dosing tubes into the dosing
auxiliary.
2 Process begins when “Dos Start” time is reached:
- Dosing pump turns ON at 80%
pump power to fill tube (dead
volume) with dosing solution.
3 Begin Dosing:
- Dosing begin with the speed (rate)
as programmed.
4 When Dose amount is reached:
- An alarm message in the Status
Line will appear “Press Esc or go to
Run Program Menu”.
Fig. 1
Dosing can be activated from manual mode or program mode. In manual mode
there is only one dosing step allowed, while in program mode dosing can be
activated multiple times.
The MPTC dosing system is semi-automatic, this means that operator interaction
is required. The controller will alert the operator with an alarm and with an
instruction on the LCD display. There are only two types of action required. One
is exchanging between chemical bottle and water. The second is keypad entries
to continue the program.