Datacolor Ahiba Ahiba MULTIPRECISE TC, User Manual

Page: 69 / 103

68 ahiba
AHIBA MULTIPRECISE TC - Run Program Menu
In the RUN PROG menu you can start or stop a program. The subsequent menu
depends upon whether or not a process is running.
If no process is running, the following menu is displayed:
RUN PROG NO._ Start a program. Enter the desired program number.
Press
[ENTER] to start the program. Befoer the
program starts, a submenu will appear to allow the
program to be started at any step. The default step is
1.
DELAYED RUN NO._ Delays the start of a program. Enter the desired
program number. Press
[ENTER] to call up the
function. Enter the start date and time (mm-dd-yyyy
hh/mm)and press
[ENTER].
DATA & OVERVIEW Activate the overview mode. Press [ENTER] to call
up the function.
DATA Display the detailed data menu. Press [ENTER] to
call up the function.