Datacolor Ahiba Ahiba MULTIPRECISE TC, User Manual

Page: 51 / 103

50 ahiba
AHIBA MULTIPRECISE TC - Calibration (Water Flow Meter)
Calibration:
A. Go to: CONFIGURATION, USER SETUP, CAL WATER FLOW
B. The menu as shown below appears:
PULSE / ltr 2220
EXECUTE
Move cursor to EXECUTE and press [Enter].
C. Measure the water in the beaker. To measure the water, drain the water by
opening the manual valve withdrawal knob. To help push water out, close the lid
and go to MANUAL, FUNCTION, PRESSURE . The volume should be 200 ± 2%
ml. Repeat to ensure that the first data is correct.
D. If the measured volume is differnet and exceeds the tolerance, then enter the new
value per the following formula:
(1 + ) 2220 = YYYY
Where: XXX is the measured volume drained out of the beaker. And YYYY is
the new value to be entered in Pulse / Ltr.
E. The newly enter value has not been saved. To save value, press EXECUTE
again. When finished, press [Esc] twice. Press [Enter] when confirmation menu
appear.
SAVE PARAMETERS
Yes, press [Enter]
No, press [Esc]
Verify Calibration Result:
F. Go to MANUAL FUNCTION, FILL CW 100ml.
G. Verify that the volume is 100ml ± 2%.
H. Repeat for 200ml and 400ml.
I. If necessary repeat steps D - F above.
200-XXX
200
*