Datacolor Ahiba Ahiba MULTIPRECISE TC, User Manual

Page: 71 / 103

70 ahiba
AHIBA MULTIPRECISE TC - Display Actual Values
When the DATA menu is selected, the actual process values are displayed. This
display can only be exited with [ESCAPE]. Depending upon the operating mode (M or
P), the values are displayed as follows (refer to Appendix 4):
No process running
If no process is running, the ACTUAL temperature is displayed as follows:
Tis +___•_°C Actual temperature
Automatic process running (P)
The current program step is displayed in every line. The following values are
displayed:
Tis +___•_°C Actual temperature
Tset +___•_°C Set temperature of the step
TIME ___ min Duration of Tset to be maintained (starts when the Tset
temperature is reached)
GRAD +_•_°C/m Nominal gradient (°C/min)
POWER +___% Current heating or cooling power (+ Heating, - Cooling)
FLOW __ % Motor RPM, %
HOLD _ min Will stop process when the nominal value is reached
(0/1 = OFF/ON)
START-TIME
MM-DD-yy hh:mm
Starting time of the currently running program
PROGRAM No._ Number of the currently running program
STEP No._ Current step in the process