DataCard SD260, Installation And Administration Manual

Page: 56 / 116

48 Printer Manager
•
FPower —Modify the print intensity for the F panel of UV ribbon.
•
Increase the value to make UV printing more defined on the card.
•
Decrease the value to reduce the UV intensity or prevent frequent ribbon
breaks when printing with a UV ribbon.
•
FPowerDuplex —Modify the print intensity for the back side F panel of UV
ribbon.
•
Increase the value to make UV printing more defined on the card.
•
Decrease the value to reduce the UV intensity or to prevent frequent
ribbon breaks when printing with a UV panel.
•
KCustom1Power —Modify the print intensity for the non ‐ black monochrome
panel of MT ‐ KT (ST ‐ KT or GT ‐ KT) ribbon.
•
Increase the value to make single ‐ color printing thicker and more defined
on the card.
•
Decrease the value to reduce the monochrome intensity or to prevent
frequent ribbon breaks when printing with the M panel.
•
KCustom1Power1200DPI —Modify the print intensity at 1200 dpi for the non ‐
black monochrome panel of MT ‐ KT (ST ‐ KT or GT ‐ KT) ribbon.
•
Increase the value to make single ‐ color printing thicker and more defined
on the card.
•
Decrease the value to reduce the monochrome intensity or to prevent
frequent ribbon breaks when printing with the M panel.
•
KCustom1Power600DPI —Modify the print intensity at 600 dpi for the non ‐
black monochrome panel of MT ‐ KT (ST ‐ KT or GT ‐ KT) ribbon.
•
Increase the value to make single ‐ color printing thicker and more defined
on the card.
•
Decrease the value to reduce the monochrome intensity or to prevent
frequent ribbon breaks when printing with the M panel.
•
KPower —Modify the print intensity for K (single ‐ color) panel or K (single ‐
color) ribbon.
•
Increase the value to make single ‐ color printing thicker and more defined
on the card.
•
Decrease the value for crisp bar codes or to prevent frequent ribbon
breaks when printing with the K panel.