DataCard SD260, Installation And Administration Manual

Page: 53 / 116

SD Series Installation and Administrator’s Guide 45
•
SNMP —Enable or disable SNMP Service.
•
WebServerSecure —Enable or disable access to Printer Manager (the web
server) through the secure port.
VitalProductData
The VitalProductData settings allow WebService access level users to change
information about the printer or system in specific circumstances. Contact your
service provider for information about modifying the VitalProductData settings.
FrontPanel
Use the FrontPanel settings to customize the printer front panel.
Change the front panel settings as needed, and then click Set Current to apply the
changes.
•
BacklightBrightness —Set the LCD front panel backlight brightness at the
desired level, from 1 percent (dim) to 100 percent (bright).
•
KeySenseLevel —Set the front panel key sensitivity to a comfortable level.
Select from 0 (low sensitivity, almost a press) to 10 (high sensitivity, barely a
touch).
Caution:
Do not disable the web server. If the web server is
disabled, you cannot launch Printer Manager and configuration
changes cannot be made. To reverse this action, you must contact
Datacard. To restrict access for the WebAdmin access level, select
Printer Setting > Update Password and specify a password.
Description
Default
Value
Current Value
(unit)
Allowed
Range
1) BacklightBrightness 100 100 [0 – 100]
2) KeySenseLevel 5 5 [0 – 10]
3) LcdConfigMenu Enabled Enabled
4) LedCardsPickedToCleaning 1500 1500 [0 – 1000000]
5) LedPrintheadCyclesToCleaning 2500 2500 [0 – 1000000]
6) LedRibbonLow 10 10 [0 – 1000000]
7) SpeakerEnabled Enabled Enabled