DataCard SD260, Installation And Administration Manual

Page: 57 / 116

SD Series Installation and Administrator’s Guide 49
•
KPower1200DPI —Modify the print intensity at 1200 dpi for the K panel or
K ribbon.
•
Increase the value to make single ‐ color printing thicker and more defined
on the card.
•
Decrease the value for crisp bar codes or to prevent frequent ribbon
breaks when printing with the K panel.
•
KPower600DPI —Modify the print intensity at 600 dpi for the K panel or
K ribbon.
•
Increase the value to make single ‐ color printing thicker and more defined
on the card.
•
Decrease the value for crisp bar codes or to prevent frequent ribbon
breaks when printing with the K panel.
•
KPowerDuplex —Modify the print intensity for the back ‐ side K panel and
K ribbons.
•
Increase the value to make single ‐ color printing thicker and more defined
on the card.
•
Decrease the value for crisp bar codes or to prevent frequent ribbon
breaks when printing with the K panel.
•
KWhiteShade —Modify the amount of power applied to the printhead to
reduce ribbon friction without transferring material. Decrease the value if
material transfers to the card when it should not.
•
LeadTrim —Modify the number of millimeters to remove from the leading
edge of a full ‐ size image to keep it within the print area (1 mm = 0.0394 in. or
about 11.8 dot rows).
•
SettingsGroupPurpose —State the purpose of a settings group. Group names
are not changeable. Use this option to identify the reason for creating a
settings group.
•
TPower —Modify the intensity of the T (topcoat) ribbon panel.
•
Increase the value to make printed topcoat thicker or more uniform.
•
Decrease the value to prevent frequent ribbon breaks while printing the
topcoat.