DataCard CR805, User Manual

Page: 39 / 136

CR805 Retransfer Card Printer User’s Guide 23
When the printer is in the Ready status, the LCD displays the model number of the printer.
Press the U
SER
button to suspend the printer. Then, press E
NTER
to enter the menu system. Use
the arrow keys to move through the menus, and press E
NTER
to make a selection. The menu
system has four major branches:

Use the Maintenance menu to run a cleaning card, print a test card, or reset the locks on a
system with locks.

Use the Status menu to see settings and data about the printer.

Use the Configuration menu to change settings.

Use the Activate menu to enable or disable the printer.
H
INTS
& T
IPS

You can access the menu system when Ready displays on line 1 of the LCD panel.

The printer returns to the Ready status after 2 minutes of no activity. Changes that have not
been applied are lost.

To leave a selection without changing the value, press the up or down arrow key until Exit
displays, and then press E
NTER
.
Retrieve the Printer’s Network IP Address
You must know the printer IP address to perform some tasks. For example, the XPS Card Printer
Driver asks you to enter the network IP address during installation. You also use the IP address
when launching Printer Manager, the printer’s web interface, from a browser window.
To display the IP address, you can do one of the following:

Press the up or down arrow key while the printer displays Ready. Refer to “Down Arrow, Up
Arrow, and Enter Key” on page 19 .

Use the LCD menu system Status menu.
The printer supports both IPv4 and IPv6 addressing. Because an IPv6 address is much longer than
an IPv4 address, the LCD displays the two types of addresses differently.
The Activate menu is used only during installation or removal of financial systems
that require activation.