DataCard CR805, User Manual

Page: 133 / 136

CR805 Retransfer Card Printer User’s Guide A-11
Empty the Laminator Reject Tray
Unfinished cards, or cards that were not processed properly, are placed in the laminator reject
tray.
1.
Unlock and open the laminator access door.
2.
Press the reject tray release button to open the
laminator reject tray. (Refer to
“Inside the Laminator” on
page A-4 .)
3.
Remove the rejected cards from the reject tray.
4.
Close the reject tray.
5.
Close and lock the laminator access door.
Clear a Laminator Card Jam
1.
Unlock and open the laminator access door.
2.
Remove the L1 and L2 (if installed)
laminator cartridges.
3.
Turn the manual advance knobs inside of
the laminator until the card is accessible.
4.
Remove the card.
5.
Replace the laminator cartridges.
6.
Close and lock the laminator access door.
The printer reject tray is not used when the laminator is present. Rejected cards are
always placed in the laminator reject tray