DataCard CR805, User Manual

Page: 107 / 136

CR805 Retransfer Card Printer User’s Guide 91
153: Insert same card side 2 up
1.
Take the card from the printer and turn it over end to end so side 2 is facing up.
2.
Insert the card in the printer.
3.
If the card is not immediately picked, press the printer’s U
SER
button or click OK.
Click Cancel on the PC if you want to cancel the card.
166: C2 supply out or missing
The C2 retransfer film is missing or out of material.
1.
Open the printer access door and remove the C2 retransfer film cartridge.
2.
Replace the retransfer film.
3.
Replace the C2 retransfer film cartridge.
4.
Close the printer access door.
Press the U
SER
button on the printer to clear the message. On the PC, click OK, or click Cancel to
cancel the card.
H
INTS
& T
IPS
Refer to “Replace the Retransfer Film” on page 39 for more information.
167: C2 supply not identified
The printer cannot use the C2 retransfer film installed. The card will be canceled.
Use a supply designed for this printer.
Press the U
SER
button on the printer to clear the message. On the PC, click Cancel.
168: C2 supply not supported
The printer model cannot use the C2 retransfer film installed. The card will be canceled.
Use a supply designed for this printer model.
Press the U
SER
button on the printer to clear the message. On the PC, click Cancel.
170: Insert new card side 1 up
1.
Insert a new card in the printer with side 1 facing up.
2.
If the card is not immediately picked, press the printer’s U
SER
button or click OK.
Click Cancel on the PC if you want to cancel the card.