Data Modul PCM-3362 Manual Download Page 42

Page: 42 / 88

PCM-3362 User Manual

Chapter 3

MI BIOS

Setup

USB Functions

Disabled, 2 USB Ports, or 4 USB Ports.

USB 2.0 Controller

Enables or disables the USB 2.0 controller.

GbE controller

Enables or disables the GbE controller.

GbE LAN Boot

Enables or disables GbE LAN boot.

GbE Wake Up From S5

Enables or disables GbE LAN wake up from S5 function.

HDA Controller

Enables or disables the HDA controller.

SMBUS Controller

Enables or disables the SMBUS controller.

SLP_S4# Min. Assertion Width

This item allows you to set a delay of sorts.

3.8

Exit Option

Figure 3.27 Exit Option

3.8.1

Save Changes and Exit

When you have completed system configuration, select this option to save your
changes, exit BIOS setup and reboot the computer so the new system configuration
parameters can take effect.

Select Exit Saving Changes from the Exit menu and press <Enter>.

The following message appears: Save Configuration Changes and Exit Now? [Ok]
[Cancel]

Select Ok or cancel.

Summary of Contents for PCM-3362

























































































Search results

Summary of Contents for PCM-3362

Reviews:

Related manuals for PCM-3362

Brands by name

Popular brands

Data Modul PCM-3362, Manual

Search results

Summary of Contents for PCM-3362

Reviews:

Related manuals for PCM-3362

Brands by name

Popular brands